Compliance Testing and Inspection Services

Your UST systems must be maintained in compliance with applicable TCEQ rules. Your UST system must comply with all technical and administrative requirements.

We are here to help! We ensure that your UST system meets all of the technical and administrative requirements. We provide the following services:

On a 30-day basis, we ensure that your site-specific release detection method is functioning properly.

Mechanical ALLDs are required to be performance tested annually. Our equipment is able to ensure your ALLDs device can detect any release from the piping system of 3 gallons per hour at 10 pounds per square inch within one hour by simulating a leak.

Pipeline Tightness Testing must be done at least once per year in accordance with a standard of practice developed by a nationally recognized association. Our equipment is able to detect any release from the piping system of 0.1 gallons per hour when the piping pressure is at 150% of normal operating pressure.

Containment sumps and spill prevention equipment prevent the need for cleanup of contamination. We are able to perform high level and low hydrostatic testing to determine the sump integrity and offer you solutions for repair.

We have created the industry’s first Hindi Class C Operator training course by partnering up with UST Training, which has been in the UST industry for 30 years and training operators since 2002.

We are focused on helping UST facilities achieve compliance with all of the UST environmental regulations, we help by maintaining an electronic and physical record folder, we communicate with state officials to provide records during site visits

Stage I vapor recovery is a way to capture gasoline vapors that are released when gasoline is delivered to a storage tank. We are able to test your Pressure/Vacuum Vent Valves for its keak rate and cracking vacuum and pressure.